Gripper knowledge / 01 / Office cup

A measured cup.
A nonlinear spring.

How the standard Ø41 mm suction cup’s loading fit became a force law for the gripper simulator — and where the measurements stop.

Standard cup envelopeØ41 mm
Free / working design height47 / 28 mm
Loading fit through36.97 N
Recorded pull-off41.19 N
STATIC AXIAL MODEL · ≈ −60 kPa

Pull on the cup

Drag to orbit; scroll to zoom. Move the load slider to stretch the cup and follow its force curve.

SCHEMATIC · NOT MANUFACTURING CADY ↑Loading 3D view… The plots and numerical model work independently.

Force versus extension

A logarithmic force law: the cup becomes softer as it extends. Dashed amber marks extrapolation beyond the recorded fit range.

Axial force versus extensionForce rises logarithmically to 36.97 newtons within the reported loading fit, then extrapolates to a pull-off threshold of 41.19 newtons.
Stored fit, rebasedExtrapolation
Axial force—
Cup height—
Tangent stiffness—

Same compliance. Different height datum.

Original and rebased cup heights versus load, offset by 1.372 millimetres
Original fitSimulator

The simulator moves the original curve down by 1.372 mm. This rebase is unvalidated: it changes absolute height at every load. The points on these plots are calculated, not raw bench samples.

01 / MEASUREMENT

Height from load

The stored coefficients imply an exponential height law. The original sample table and regression procedure are absent from the inspected files.

h_original(m) = 27.351 + 1.372 exp(0.7669 m) mm

m is equivalent mass in kg. At m = 0, the original fit is 28.723 mm high.

02 / REFERENCE CHANGE

Start at the seal

The model needs zero force at its sealed rest state. Subtracting 1.372 mm creates a zero-extension origin.

d = 1.372 expm1(F / B) mm h_sim = 27.351 + d mm

B = g / 0.7669 ≈ 12.78739 N. The 28 mm design height remains a separate packaging value.

03 / SIMULATION

Force from motion

Invert the exponential and evaluate it at each cup’s axial displacement. The 3D view here shows the static elastic branch.

F = B log1p(d / 1.372) N k = B / (1.372 + d) N/mm

The simulator additionally includes provisional damping, compression, shear and failure laws.

The standard cup, specified honestly

PropertyValueWhat we know
IdentityOffice cup · profile officeBrand and part number not recorded
Lip / packing diameter41 mm / 41 mmProfile dimensions and GEO-03 requirement
Free / working height47 mm / 28 mmDesign requirement; no box / box attached
Sealed simulation height27.351 mmStored calibration reference
Bellows diameter38 mmIllustrative rendering value, not a vendor specification
Folds / physical strokeUnconfirmedThe drawn folds and neck are illustrative
Loading fitThrough 3.77 kg / 36.9710705 NSource-reported measured range at approximately −60 kPa
Pull-off4.2 kg / 41.18793 NSeparate observation; per-cup and cardboard applicability unconfirmed
Material / fitting / hardnessNot recordedRequires inspection or a manufacturer specification

At the fit boundary the rebased model predicts 50.696 mm total height; at pull-off it predicts 60.351 mm. These are calculated heights, not measured travel limits. Free height is not a calibrated extension stop.

What happens at failure?

The simulation detaches at tensile force ≥ 41.18793 N. It does not keep carrying the threshold force after separation. In this explorer, the load remains as a threshold marker while the separated cup returns to its illustrative free shape.

Beyond 3.77 kg the curve is extrapolated. Dynamic damping can reach pull-off sooner. Shear and peeling can detach a cup before the axial threshold is reached.

What remains provisional?

Default damping: 8 N·s/m. Compression stiffness: 12 N/mm. Shear stiffness: 4 N/mm. Friction: 0.5. Peel angle: 20°. Sliding limit: 5 mm. These are model inputs, not measured material properties.

No leakage, pressure dynamics, cardboard flex, hysteresis or physical rubber travel limit is solved. Optional pressure scaling is a hypothesis; VMECA curves are separate similarity estimates.